NITRO Chiptuning, OBDII, Diesel

Plug and Drive device for increasing the performance of passenger cars. Just plug it into the OBD2 connector for increased power and torque. No additional settings are required. The device automatically analyzes your vehicle and adjusts the necessary settings for maximum effect. Settings are made only within the standard specified by the manufacturer. It will not damage the engine or the vehicle other parts. The results are the same as when the software is modified in special services. With the price difference and the easy resetting of the vehicle to its original settings. After disconnecting the device from the OBD2 connector, the vehicle will automatically return to its original settings. No additional settings are required. OBD2 chiptuning works by changing the signal of the control unit. This is a remapping of the control unit.

It automatically detects your driving habits and creates a new schedule in the control unit that increases engine power by 35% and torque by 25%. The red power booster is designed for diesel engines of vehicles that support the OBD2 protocol. NitroOBD2 Installation and Calibration 1. Remove the key from the ignition. 2. Connect the device to the OBD2 connector 3. Insert the key into the ignition and turn the key to the first gear (do not start the car). 4. Press the Reset button for about 5 seconds. After releasing the button, wait about 30-50 seconds. (the device will communicate with the ECU and establish a connection with it) 5. Start the engine. After driving 200 km with the connected device, NitroOBD2 will automatically adjust the engine power according to the driving mode.